GT6 Independent Rear Suspension Kit
This is truly one of PRI ’s most significant products since opening in Y2K.
No mods or welding required this kit is purely bolt-on taking only about one hour of your time with common tools.
Gone is the troublesome transverse leaf spring that has plagued all Harold chassis cars since their very beginning. No more driver’s side sag or severe negative camber; PRI’s new “fully independent” rear suspension kit adds adjustability and control at the rear with a whole new level of performance. The cars weren't test lightly. During development the kit was put through a series of very serious driving stints while installed on to a 130 hp Stage Three prepared Triumph Spitfire sporting very sticky 205/40/16 DOT race tires. Every situation was challenged from smoking the rear tires from a launch to power sliding through long sweeping turns at unmentionable speed. The car was even pitched the sideways down a drive way onto a crowned street to put an outrageous side load on the new system while under power and not only did it not phase the kit but it was hardly detectable in the car as it literally glided through the transaction. The car does exactly what you’d expect under any given circumstance. This means greater traction and safety on the street and faster lap times on the track. The car can definitely be driven faster and harder with a much higher level of confidence. The PRI I.R.S. kit gives the car a higher degree of precise and predictable handling not to mention the super smooth ride it offers. It has been a long time project that didn’t come easily. For this kit to work as well as it does everything had to gel as one unit. The torsional rigidity, travel ratio, spring rate and shock valving took some serious number crunching combined with hundreds of miles of test driving all of which lead to very stunning results. But perhaps the most difficult challenge was to create a simple and affordable solution for a very complex problem, a system that can be easily installed by our customers who aren’t mechanics or fabricators by trade. Like many of PRI ’s products for the Triumph GT6 it is first class in design and materials, we even integrated o.e. products into the kit to keep it true to Triumph tradition.
PRI’s I.R.S. kit will also replace 67-72 Triumph GT6 rotoflex system with greater handling results while aiding in the transfer of more power to the ground. Any future work at the rear will also become much easier and safer after the kit is installed.
CH-GT6-RACA Rear Axle Conversion Assembly: $1,400
PRI’s I.R.S. kit is offered in four different stages to suit your experience level.
Stage One: $1,350
One pair of handcrafted light weight aircraft aluminum control arms, bushing kits, precision pivot box and one pair of high tech, precisely tuned, adjustable coil over, inverted shock absorbers in the same class as Pensky, Fox and Ohlins.
Stage One Plus TCS: $2,100
Same as the Stage One but includes the Total Control Shocks for the front shocks
Stage Two: $1,860
Same as Stage One plus upgraded “piggy-back reservoir” shock absorbers that have independently adjustable compression and rebound damping for even deeper tuning for autocross, track or the serious canyon carver.
Stage Three: $1,970
Same as Stage Two plus “remote” reservoir shock absorbers that mount inside car for convenient compression adjustability while driving.
Stage Four: Adds $2,150 to each of the above kits.
Includes our heavy duty race axles at a 10% savings.